According to Article 7 (2) of the Consumer Protection Law, BSMI announces that the following C.C.C Code products with display panels shall be marked on the body and the warnings and precautions marked with the product manual and packaging. This specification was implemented on September 1, 2016.

(A) warning signs

1. warning content: the use of excessive fear of fear of vision.

2. Marking position: product ontology, manual and packaging.

3. Display mode: imprint, sticker, or boot screen display, or other way.

4. Mark the font: it is recommended to mark the length and width of the font of not less than 2 mm. But the maximum surface area of less than 80

Square meter of the product ontology, marking the font length and width of each less than 2 mm.

(2) Notice:

1. Note:

(1) Use 30 minutes to rest for 10 minutes.

(2) less than 2 years old children do not see the screen, 2 years old to watch the screen every day not more than 1 hour.

2. Marking position: product brochures and packaging.

3. Display mode: imprint, sticker, or boot screen display, or other way.

4. Mark the font: it is recommended to mark the length and width of the font of not less than 2 mm. But the maximum surface area of less than 80 square meters of the product ontology, marking the font length and width of each less than 2 mm.

Taiwan BSMI certification

Taiwan BSMI is the abbreviation of "Bureau of Standards, metrology and Inspection", which is the standard inspection bureau of the Ministry of Economic Affairs of Taiwan. It is a product inspection standard formulated by the Ministry of Economic Affairs Standard Inspection Bureau (BSMI). Where the Ministry of Economic Affairs announced that the product should be tested to enter the Chinese market in Taiwan are subject to inspection by the Bureau of inspection inspection, the product is authorized to use the BSMI logo, to enter the Chinese market in Taiwan.